•Support data remote download.
•Network protocols include TCP, UDP, IP, ARP, ICMP, Ethernet MAC.
•Convert RS -232C / RS-485 serial interface to Ethernet interface.
•Four LEDs display status information: SYS(PWR), LAN Speed, LAN Rx, LAN Tx.
•With watch dog function.
•Easy installation for wall, desktop or any where mounting.
Auto-detecting Ethernet :
•Connector type: RJ-45 (Female).
•Speed : 10 / 100 Mbps.
•Protocol : TCP, UDP, IP, ARP, ICMP, Ethernet MAC.
•Mode : TCP Server/Client ; UDP Client : Broadcast.
Serial Port :
•Port : RS -232C / RS-485
•Speed : 300bps ~ 921,600 bps.
•Connector type : DB9 (Female).
•RS-232 : TxD, RxD, R TS , C TS , DTR, DSR, GND.
•RS-485 : Data A, Data B.
•Dimensions(LxWxH): 115 x 78 x 31mm / 4.5 x 3.1 x 1.2inch
•Enclosure material: ABS
•Power supply: 12V DC, 150mA
•Operation temperature: -15°C ~ 55°C
•Humidity: 10%~90%
1. Auto-detecting ethernet:
(1) Processor: 32bit MCU and 32K flash.
(2) Memory: 1M flash (inside MCU), 16M SRAM.
(3) Connector type: RJ-45 (female).
(4) Speed: 10 / 100 Mbps.
(5) Protocol: TCP, UDP, IP, ARP, ICMP, ethernet MAC.
(6) Mode: TCP server/client; UDP client: broadcast.
(7) Setup: HTTP browser setup (IE & netscape).
(8) Security: setup password & connect password.
2. Serial port:
(1) Port: RS-232C / RS-485 / RS-422, TTL * 1 Port.
(2) Speed: 300bps ~ 115,200 bps.
(3) Parity: none, odd, even.
(4) Connector type: DB9 (female).
(5) Data bit: 7, 8.
(6) Stop bit: 1, 2.
(7) RS-232: TxD, RxD, RTS, CTS, DTR, DSR, GND.
(8) RS-485: Data A, Data B.
(9) RS-422: Tx+, Rx+, Tx-, Rx-.