1. Character:
-Multiple microprocessor design base.
-Compatible with both linear & non-linear load.
-Stronger charger to support batteries of 600AH up.
-24 hours operation on the inverter.
-DC start and automatic self-diagnostic function.
-THD less than 3%.
-High efficiency design to save electricity.
-Low heat dissipation in long time operation.
-Design to operate under harsh environment.
-3U 19" Rack Mount or WALL Mounted design.
-DC priority or AC priority selectable.
-Support solar panel
2. Description:
-Solar Inverter with LCD Display~
PURE SINE WAVE Inverter with DC battery charger and Solar charge controller.
-Connect directly with Solar system.
-Smart; powerful and successful.
Model | PM-2400SLU-24 | |||
Capacity | VA / Watt | 3.6KVA / 2400W | ||
Input | Nominal Voltage | 220Vac ; 110Vac | ||
Voltage Range | Acceptable Voltage Range | 120-280Vac ; 60-140Vac | ||
Frequency | 50Hz / 60Hz ( 45Hz - 70Hz) | |||
Line Low Transfer | 120VAC ± 2% ; 60VAC ± 2% | |||
Line Low Return | 130VAC ± 2% ; 65VAC ± 2% | |||
Line High Transfer | 280VAC ± 2% ; 140VAC ± 2% | |||
Line High Return | 260VAC ± 2% ; 130VAC ± 2% | |||
Output | Voltage | 200 / 220 / 230 / 240Vac (re-settable via LCD panel) 100 / 110 / 115 / 120Vac (re-settable via LCD panel) | ||
Voltage Regulation (Batt. Mode) | < 3% RMS for entire battery voltage range | |||
Frequency | 50Hz or 60Hz | |||
Frequency Regulation (Batt. Mode) | ± 0.1Hz | |||
Power Factor | 0.67 | |||
Waveform | Pure Sinewave | |||
Effiecincy | > 80% | |||
Overload Protection | Line Mode | Circuit Breaker | ||
Battery Mode | 110% ~ 150% for 30 sec. ; >150% for 200ms | |||
Transfer Time | Typical | < 8 ms. | ||
Battery | Battery Voltage | 24Vdc (20~32) | ||
Backup Time (at full load) | long time available | |||
Max. Charging Current (3 steps selectable) | 60 / 80 / 100 Amp | |||
Solar Charge | Battery Voltage | 24V | ||
Charge Voltage | 27.7V | |||
Solar Maximum Peak Voltage | 50.0V | |||
Solar Charge Working Voltage | 24.0V | |||
Maximum Charging Current | 50A | |||
Polarity Protect | YES | |||
Back Flow Protect | YES | |||
Display LCD | LCD | UPS status; I/P&O/P Voltage Frequency; Load%; Battery Voltage & %; Charge current; Temperature; Model | ||
LED | Normal (Green); Warning (Yellow); Fault (Red) | |||
Audible Alarm | Battery Mode | Beeping every 4 seconds | ||
Low Battery | Beeping every second | |||
UPS Fault | Beeping Continuously | |||
Overload | Beeping twice per second | |||
Environment | Operation Temperature | 0-40 °C ; 32-104 °F | ||
Relative Humidity | 0-95% non-dondensing | |||
Audible Noise | Less than 55dBA (at 1M) | |||
Physical | Net Weigh (Kgs) | 23 | ||
(WxHxD) mm Black Case | 298 x 450 x 150 | |||
(WxHxD) mm Rack Mount | 440 x 132 x 360 | |||
(WxHxD) mm Wall Mounted | 298 x 450 x 190 |
* Specifications are subjected to change without prior notice.