S-D25 Automatic Five Gallon Square End Lining and Drying Machine is designed for five gallon tin bottom end. Curled end is separated by a pair of separating knives on the end magazine; then, end is smoothly fed forward via two end pushing bars guided by linear bearings. Two sets of electronic lining guns undertake compound lining. Guns turn along end fringe according to a cam contour. Lining time is controlled by a sensor and a timer. Lined ends are guided by several transfer screws up and down inside the drying oven. Heating air is created and recycled through two sets of electric heater and blower. Simple structure and multiple safety devices, easy for operation and maintenance.
Machine Type | S-D25 | |
Range of End Size | 205 x 205 - 250 x 250 or 150 x 150 - 210 x 210 mm | |
Capacity Per Min. | Up to 65 Ends | |
Horse Power Required and Heater | Main Motor | 1HP x 1 |
End Discharge Motor | 1/2HP x 2 | |
Blower | 1/2HP x 1 | |
Heater | 15KW | |
Floor Space Overall Height | 4200 x 1300 x 3270 mm |
*Drying Oven is vertical design, hence save space.
*Safety devices provided to ensure M/C running safely.
*Auto temperature controller enable to adjust the best curing temperature.
*Easy adjustment and quick for can size change over.
*Equipped with two Electronic lining gun for end compound lining, easy for volumn adjust.
*Drying oven equipped with electric (resistance) heating system.
*Lined ends are guided up and down via transfer screws inside drying oven.
*Equipped with modern end magazine with swing stoppers ; hence, reduce scratch on ends.
*A pair of linear bearing guide end pushing bars smoothly.
*Can be equipped with twin drying oven (optional).
*Lining gun shooting angle is adjustable to apply the compound hear curl area.
*Recommended for Water base compound.