DV series is designed for heavy cutting requirements. All the main casting parts are made from Meehanite level cast iron with one-piece design. 4 box way of bed offers more support ability to ensure the best performance on loading and rigid ability during heavy cutting. All guide ways are through heat treatment to meet HRC50 hardness. The sliding surface are adopted Turcit through scraping to decrease friction to keep the best feeding performance.
1.One-piece casting for axial bearing housing, XYZ axes with motor direct-driven ball-screw to make sure high positioning accuracy
2.Z axis with High torque to make sure high acceleration transmission (Ball-bar test less than 0.01mm)
3.Roller type linear guide way, loading and rigidity are 30% higher than other C type machine with ball bearing type
Friendly Operation
1.Front large door for easily loading work piece, wider visible zone for easily watching cutting status
2.Sliding doors at both sides allow less space occupation and ensure no chips or coolant to splash out during operation
3.Reinforced glass safety protection
4.Stainless cover, prolonged machine lifecycle
5.Various usages, a storage space locating under operation panel allows user easy to put their objects; movable chip conveyor allows user’s working requirement
6.Convenient coolant and pneumatic interface, front location of coolant / pneumatic interface lets user easily to operate
Model | Unit | DV-1475 | DV-1680 |
X axis | mm | 1,400 | 1,600 |
Y axis | mm | 750 | 800 |
Z axis | mm | 700 | 700 |
X axis span / width | mm | 500 | |
Y axis span / width | mm | 1,280 | |
Z axis span / width | mm | 660 | |
X / Y / Z diameter | mm | Φ50 | |
Pitch | mm | 12 | |
Dimension | mm | 1,600×750 | 1,600×750 |
Max. loading | kg | 1,500 | |
Max. loading | rpm | G:6,000 / P:8,000 / DD:10,000/12,000 /15,000 | |
Type | type | Gear /Belt driven (OPT.) / Direct driven (OPT.) | |
Motor power(Cont. /30 min rated) | kW | 15 / 18 (11 / 15) | |
X / Y / Z axis servo diameter | kW | 3 / 3 / 3 | |
Taper | type | BT50 / BT40(D. D) | |
Front bearing diameter | mm | 90 | |
Cutting feed rate | m/min | 1-10 | |
Rapid traverse(X / Y / Z axis) | m/min | 15 / 15 / 12 | |
ATC type | Arm type | ||
Tool magazine capacity | pcs | 24 / 32 | |
Tool weight | kg | 15 / 7(BT40) | |
Max. length | mm | 300 | |
Tool changing time (T to T) | sec | 2.5 (1.8) | |
Power | kVA | 30 | |
Pneumatic | kg/cm2 | 6 | |
Machine net weight | kg | 12,800 | 14,200 |