Ace Plus Corp.

Manufacturer of Electronic, Electrical Components & Parts.

Products

PoE Switches

poe-switches

  • Model No: AS-5308
  • Factory Location: Taiwan
  • Sample Request: No
  • Target Markets: Worldwide

Detail Information

Description :

PoE allows power to be supplied to end devices, such as Wireless Access Points or VoIP Phones, directly through the existing LAN cables. By supplying the power end-span, you can centralize power distribution and backup without the need to increase infrastructure.

Specification :

1. Description: 8-port unmanaged 10/100 fast ethernet switch with 4 PoE ports. 2. Standards: IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX. 3. Media: 10BASE-T: UTP Cat. 3, 4, 5 or up ; 100BASE-TX: UTP cat. 5 or up. 4. No. of Port : 8*10/100 mbps RJ-45 ports with 4 PoE ports . 5. Auto MDI/MDI-X: yes. 6. Transmission mode: 10/100Mbps, full/half-duplex (auto-sensing). 7. Transfer rate: 10Mbps: 14880pps (64 Bytes Package) ; 100Mbps: 148800pps (64 Bytes Package). 8. Flow control: IEEE 802.3x flow control for full-duplex back pressure in half-duplex operation mode. 9. Switching method: Store & forward. 10. LEDs: power, Link/Act, speed, PoE activity. 11. Ambient temperature: 0° to 50°C. 12. Humidity: 5% to 90% . 13. Voltage: AC 90-264V. 14. Frequency: 47-63Hz. 15. Power consumption: 65W, -48VD, 1.35A . 16 Physical dimension: 44(H) X 220(W) X 130.5(D) mm. 17. Safety: comply with FCC Part 15 Class A & CE mark approval.

Features :

Key features:
1. Conforms to IEEE 802.3 10BASE-T, IEEE802.3u 100BASE-TX and IEEE 802.3x flow control standards.
2. Supports 10/100Mbps auto-detect half/full duplex.
3. Supports TP interface auto MDI/MDI-X function for auto TX/RX swap.
4. Supports 802.3x flow control pause packet for full duplex.
5. LEDs to indicate: Link/Act, Speed, Power Status and PoE activity.
PoE features:
1. Supports IEEE 802.3af compliant.
2. Supports Power over Ethernet (PSE) on each PoE-TP port (End-Point).
3. Full power(15.4w) support for per PoE-TP port.
4. Auto detect powered device and consumption levels.
5. Smart feature for PD on/off, PD detection, power level, PD status and power feeding priority(X).
6. Automatic fault detection (over/ under voltage & current).
7. Thermal shutdown protection(Tj > 150℃).
8. LED indicators for and POE activity.

Ace Plus Corp.

  • Taiwan