Description :

◾Spindle speed STD. 10000rpm
OPT. 12000rpm
15000rpm
20000rpm
24000rpm
◾Spindle motor M70V-B 5.5/3.7kw
0iMD 5.5/3.7kw
◾Rapid traverse X,Y,Z: 48/60/48 m/min
◾X axes travel 400mm
◾Y axes travel 450mm
◾Z axes travel 380mm
◾Magazine capacity 24+1
◾ATC time (T-T) 2.5sec
◾Table size 400*400mm

Specification :

		Unit	H4030
Table size		mm	400 × 400
Max. Table load		kgf	200
Max. Workpiece dimension (Ø x Height)		mm	Ø480 × 540
Min. Indexing precision of table		degree	0.001
Cumulative indexing precision of table		sec	20
Table repeatability accuracy		sec	4
X,Y, Z axis travel		mm	400 × 450 × 380
X,Y, Z axis rapid traverse		m/min	48 / 60 / 48
3 axes bidirectional accuracy of positioning		mm	0.005 / 300
3 axes bidirectional repeatability of positioning		mm	±0.003
Spindle speeds		rpm	10000
Spindle taper			BT30
Pull stud			MAS 403 P30T-1(45°)
Spindle driving			Direct-drive
Spindle center to surface of table		mm	90~540
Spindle nose to table center		mm	190~570
Spindle motor	Mitsubishi	kw	5.5 / 3.7
	FANUC	kw	5.5 / 3.7
X drive motor	Mitsubishi	kw	1.5
	FANUC	kw	1.6
Y drive motor	Mitsubishi	kw	3.0
	FANUC	kw	3.0
Z drive motor	Mitsubishi	kw	1.5
	FANUC	kw	1.6
B drive motor	Mitsubishi	kw	1.5
	FANUC	kw	1.6
Magazine capacity		no.	24+1
Max. Tool weight		kg	4
Max. Tool length		mm	200
Max. Tool diameter		mm	80
Atc time (T-T)		sec	2.5
Tool change type			Arm type
Tank volume		l	200
Coolant pump rate		w	600 x 2pcs
Flow rate		l/min	136
Chip flush type			Flushing type
Auto. chip conveyor			OP
Net weight		kg	3700
Floor space		mm	1835 × 2593 × 2407

* Tool change time supplied with standard 60Hz power and based on Mitsubuishi controller. For electrical requirements other than this standard, please contact one of our personnel.

• 
  CNC Drilling Tapping Centers
• 
  CNC Drilling Tapping Centers
• 
  CNC Drilling Tapping Centers
• 
  CNC Drilling Tapping Centers
• 
  CNC Drilling Tapping Centers
• 
  CNC Drilling Tapping Centers
• 
  CNC Drilling Tapping Centers
• 
  CNC Drilling Tapping Centers-

More