ANSON Hydraulics Industrial Co., Ltd.
Manufacturer of Hydraulics Vane Pumps and Hydraulic Power Units.
Detail Information
Description :
1. High efficiency operation with high pressure: under the conditions of pressure 140 bar, the VP5 pump is stable and highly efficient. Due to our improvement disgns "THREE POINT RING" support systems.
2. No vibration and quiet: the cam ring is specifically designed to have a special curve so the noise level [dB] is very low, even in the high pressure operations.
3. Sharp characteristics and quick response: quick response is displayed in both "ON-OFF" control of operation, due to use special design "BIAS PISTON" stable and accurate operation can be attained in an instant.
4. Stable flow: due to use new design "pressure balance mehanism" the output flow pressure control systems, the output flow is very stable even in the high pressure ranges.
5. Energy saving type: power loss has been reduced further by application of our highly advanced precision machining
technology to assure the same high efficiency performance.
AS the "VP5" series with many new mechanisms of our improvement designs. And the power loss at the "dead head" has been reduced by a large degree.
6. Easy testing and maintenance:
pressure adjusting screw, and the volume adjusting screw
were located at the same side, and ensure easy testing at a glance.
Specification :
Variable Displacement Vane Pumps
VP※F Series-Single Pumps Model Code
| VP5F | -A | -5 | -51 | S | ||
|---|---|---|---|---|---|---|
Code Frame size | Outlet flow （at 3.5bar，1800 r/min） | Operating pressure range | Design | Shafts code | ||
| A Outlet Flow L/min (Geometric displacement cm3/rev) | ●B Outlet Flow L/min (Geometric displacement cm3/rev) | Code | Pressure range (bar) | |||
| VP5 | 30 (16) | 40 (22) | 2 | 15~35 | 51 | Omit: Woodruff key (VP5) Straight key (VP6~7) S: Splined Shaft |
| VP6 | 54 (30) | 70 (39) | 3 | 20~70 | ||
| VP7 | 120 (67) | - | 4 | 50~105 | ||
| F: Flange mounting | ●B code(40 & 70 L/min) maximum pressure 105bar Factory setting Qmax. | 5 | 70~140 | |||
| Factory setting Pmin. | ||||||
※Pumps Speed Limits
Minimum speed：800 r/min
Maximum speed：1800 r/min
Related Prodcuts
ANSON Hydraulics Industrial Co., Ltd.
- Taiwan
- No. 2, Wugong 2nd Rd., Wufeng Dist., Taichung City 41353, Taiwan
- 886-4-23335286
- 886-4-23335298