The Elite Dry Bath Incubator comes in single or dual block modes along with a comprehensive set of interchangeable blocks. It is designed for a variety of applications, including restriction digest, DNA denaturation, melting agar, coagulation studies, hybridization and hot start thermo-cycled reaction. Elite Dry Bath Incubator is recognized as the finest, fastest heating and smallest foot print dry bath incubator. In addition, the aluminum blocks can be removed for the use of a mini water bath or a bead bath. The temperature setpoint can be set in increments of 0.1°C from 5°C above ambient to 150°C. Optional PC control software allows the dry bath incubator to perform real time data recording through a PC.
Cat. No. | EL-01 (Single Block) | EL-02 (Dual Block) |
Display | LCD | |
Power | 125W | 200W |
Dimension (WxLxH) | 5.98"x5.91"x5.31" (152x150x135mm) | 5.98"x9.06"x5.31" (152x230x135mm) |
Controller | Digital microprocess controller | |
Heating chamber | Molded Waterproof aluminum alloy coated with PTFE | |
Temperature control range | 5°C above ambient to 150°C | |
Temperature increment | 0.1°C | |
Temperature uniformity at 37°C | ± 0.2°C | |
Temperature accuracy at 37°C | ± 0.2°C | |
Temperature calibration | Yes | |
Timer | 99 (hr): 59 (min) / Continuous | |
Safety | Leak proof heating chamber | |
Over temperature protection | ||
SSR failure detection | ||
Operating temperature | Ambient to 40°C | |
Special feature | Used as water bath or bead bath incubator | |
Block material | Aluminum alloy | |
Block type | Standard and customized type are available | |
PC Connection | RS232 | |
Rated voltage | 110V / 220V | |
Weight | Approx. 4.6lb (2.1kg) | Approx. 6.1lb (2.8kg) |
Blocks |
| |
Block material | Aluminum alloy | |
Dimension | (WxLxH) 3.11"x4.09"x1.97" (79x104x50mm) | |
Block lifter well | Yes | |
Thermometer well | Yes (except microplate blocks) |