*The standard screwdriver bits on the market can be used.
*The suction type screwdriver.
*The bit type screwdriver.
*Capable of loading large stock of screws
Up to 150cc scres can be loaded.
*Copes with special screws
*The screw assembled with washer or SW can also be coped.
*It handles the screw sizes of up to M5.0.
*It is equipped with an overload reverse protection circuit.
*The rail is replaceable.
*It copes with the various sizes of screws.
*Model NJ-23 handles four sizes of screws.
* Refer table 1
The angle of inclination degree adjustment of the rail is possible by the kind of screws.
Model Name & Number | NJ |
Size | 130(W) x 215(D) x 136(H) |
Weight (including rail) | Approx. 3.2 Kg |
Power Source | AC 100V, DC 12V 500mA, AC adapter |
Protection & Recovery Circuit | Motor overload stop. Protection circuit for reverse power connection |
Applicable Screw | NJ and NJR series (Refer right table for applicable screws & rail for NJ series) |
Applicable Screw Length (under head) | Up to 18mm |
Scooping Chamber Capacity | Approx. 150 cc |
Accessories (in package) | Instruction Manual Allen Wrench (L shaped, 2mm) AC adapter |
Type | NJ-12 | NJ-23 | NJ-45 | ||||||
Screw Nominal Size | 1.4mm | 1.7mm | 2.0mm | 2.3mm | 2.6mm | 3.0mm | 3.5mm | 4.0mm | 5.0mm |
Applicable Rail | R-14 | R-17 | R-20 | R-23 | R-26 | R-30 | R-35 | R-40 | R-50 |
When you place an order, please specify the type number of the applicable rail.
One Escaper comes with the rail.
* Applicable screw size: from M1.4 to M5.0
* Applicable screw length (under head): up to 18mm
* Scooping chamber capacity: 150cc
* Standard screwdriver bit can be used
* With protection and recovery circuit
* Standard screwdriver bits and suction types can be used.
* It copes with special screws (SW, PW and short neck length etc)