Wado Electrical Engineering Co., Ltd
Taiwan Manufacturers, Exporters.
Detail Information
Description :
This machine is control by PLC. Through the Servo motor – rotating / fix position / hooking / winding. It is automatic cutting and suit for general armature--- hooking commutator. The operator just put the armature into the chuck mechanism. Then, push the start button. The machine will work automatically and no need to cut the wire.
Specification :
The below is subject to change without notice.
| Wire diameter | a. 0.12～0.3㎜ b. 0.3～1.0 ㎜ |
| Motor speed | 3000 R.P.M. |
| Armature diameter | 20～90㎜ |
| Controller | PLC Control system |
| Armature stack height | 20～90㎜ |
| Wire tension | electric powder brake |
| Commutator diameter | 15～40㎜ |
| Air pressure | 4～6㎏/cm2 |
| Numbers of slots | 6～36slots |
| Motor | AC servo motor （3sets） |
| Hooking way | Alpha & U Type |
| Power supply | AC 3 ψ220V/380V 50/60HZ |
| Direction | CW or CCW |
| Dimensio | 900L×1100W（加线架寬1740）×1500H |
| Numbers of turns | 0～9999 turns |
| Weight | 750KG |
| Commutator type | Hook |
Features :
1. The latest technology for high effective and fast changeover.
2. 100 memory parameter setting for different type armature. Password setting can avoid the type setting change easily.
3. Special winding and hooking can be set. Ex. different winding turn in each slot, hooking change.
4. I/O test can be done from Touch screen. It is convenience for daily check.
5. Electric powder brake is separated with 5 ranges of tension for different winding and hooking.
6. WA-154 can arrange with fully automatic load/unload. Operator can handle several machines at same time. It increase production efficiency and save labor cost.
7. Easy and fast fixture changing.
Wado Electrical Engineering Co., Ltd
- Taiwan