Four-Jaw Two Motions Special Purpose Power Chucks

Model No: 4T
Factory Location: Taiwan
Sample Request: No
Target Markets: Worldwide

Detail Information

Description :

Four-Jaw Two Motion Type Power Chuck:
1.CRANK type with two pairs of 2 jaws self center independent of each other.
2.The 4T series is suitable for square bar and other nonuniform shaped workpieces.
3.Patent numbers :
Taiwan : PAT.M359385
China : PAT.ZL2009.2.0009309.1

Specification :

* Subject to technical changes.

Model	Plunger stroke (mm)	Jaw stroke (Dia.) (mm)	Chucking Range Max. (mm)	Chucking Range Min. (mm)	Max. D.B. pull kN (kgf)	Max. clamping force kN (kgf)	Max. speed min^-1(r.p.m.)	I kg‧m²	Weight (kg)	Matching cyl.	Max. pressure Mpa (kgf/cm²)
4T-08	17	13.6	210	24	16.0(1630)	54.3(5540)	3000	0.15	23.2	RD-120(N)	1.7(17)
4T-10	20	16	254	50	21.6(2200)	79.4(8100)	2100	0.35	44.3	RD-125(N)	2.2(22)
4T-12	20	16	304	50	21.6(2200)	79.4(8100)	1500	0.66	57.6	RD-125(N)	2.2(22)
4T-15	25	19.6	381	60	27.2(2780)	105.3(10750)	1200	2.25	118.3	RD-125(N)	2.7(27)

Model	A	B	C(H6)	D	E	G max.	G min.	G1 max.	G1 min.	H	H1	J
4T-08	210	91	170	133.4	5	32	15	2.5	-14.5	29	20	61
4T-10	254	110	220	171.4	5	36.5	16.5	10	-10	36	23	90
4T-12	304	110	220	171.4	5	36.5	16.5	10	-10	36	23	90
4T-15	381	135	300	235	6	44.5	19.5	5	-20	45	28	125

Model	K	K1	L	L1	M	N	P	Q max.	Q min.	R max.	R min.	S	T
4T-08	M14x2	M34x1.5	4~M2	20	38	95	25	25.25	13.25	46.1	39.3	35	14
4T-10	M16x2	M45x1.5	4~M16	25	43	110	30	32.25	12.75	59	51	40	16
4T-12	M16x2	M45x1.5	4~M16	25	43	110	30	54.75	15.75	59	51	40	16
4T-15	M20x2.5	M55x2	4~M20	30	51	130	30	66.5	12.5	78.9	69.1	50	21