Manual Clamping Radial Drill Machines | TAILIFT CO., LTD. | B2BManufactures.com

Model No: TPR720A
Factory Location: Taiwan
Sample Request: No
Target Markets: Worldwide

Detail Information

Description :

1.Adopts mechanic switch with forward/ reverse functions and longer service life with low damage.
2.The arm is made of high-class cast-iron. Arm slide is under strick heat-treatment and grinding.
3.2HP motor can provide diverse speed selection under heavy-duty cutting.
4.The main spindle is balanced by special spring. And is more durable than all traditional balance mechanism.
5.The over-load protective devices can secure the operator against injury.
6.Extra auxiliary dial for spindle feed depth indication. With this indicator, we can review the momental feed depth of spindle 1 through 210mm at any moment.

Specification :

MODEL			TPR-720A
Dai.of column			210	A
Distance from column surface to spindle center , Max			750	D+C
Distance from column surface to spindle center , Min			220	C
Travel of spindle head			530	D
Distance from base surface to spindle end , Max			1060	E
Distance from base surface to spindle end , Min			260	F
Elevating height of Arm			580	E-F-I
Effective area of box table			600×445×380	L×K×H
Dimension of base			1260×640×160	R×S×Q
Taper hole spindle			MT#4
Stroke of spindle			220	I
R.P.M of spindle (rpm x steps)			88 , 154 , 282 , 455 , 796 , 1500×6 steps
Feed of spindle (rev. x steps)			0.05 , 0.09 , 0.15×3 steps
Main motor (HP)			2HP
Elevating motor (HP)			1HP
Coolant equipment (HP)			1/8 HP
Machine height from floor (Max.)			2170	M
Base + column height			1850	G
Net weight (approx)kgs			1120
Shipping weight (approx)kgs			1250
Shipping dimensions (LxWxH)			1680×826×2160
Capacity	Drilling	Stell	32Ø
	Drilling	Cast iron	50Ø
	Tapping	Stell	25Ø
	Tapping	Cast iron	32Ø