*To send and extend VGA/HDMI signal with IR/RS232/Power signal over one CAT5e cable.
*Auto switch or manually setting for VGA and HDMI inputs.
*VGA support stereo audio convert to HDMI output, resolution up to 1920x1200@60Hz.
*Transmission range up to 70M by CAT5e/6 cable.
*Uncompression video transmission, HDMI resolution up to 4K@30Hz.
*Support Bi-directional IR with 30-60 KHz, RS232, PoH, and CEC.
*Max. Data Rate- 10.2Gbps.
*HDMI 1.4 and HDCP compliance.
*Audio support up to LPCM7.1@192Khz, Dolby TrueHD, DTS-HD MA.
*Support PoH (Power over HDBaseT), allow power send either from TX or RX unit.
*Built in power isolation.
*Transmitter unit include metal wall plate mounting brackets for easy installation at wall or on meeting table.
ITEM NO. | VHE02EIPT | VHE02EIPR |
---|---|---|
HDMI Interface | HDMI Type A | |
VGA Interface | VGA 15-Pin D-Sub | |
HDMI Video Support | Up to 1080p@60Hz, 48bits, 3D Up to 4096 x 2160@30Hz, 4K@60Hz 4:2:0 | |
VGA Video Support | Up to 1920 x 1200@60Hz@24bits | |
Audio Support | Up to LPCM 7.1 192Khz, Dolby TrueHD, DTS-HD MA | |
Analog Stereo Interface | 3.5mm terminal x 1 | |
HDBaseT Connector | RJ45 x 1 | |
HDBaseT Distance | 70M (Max) | |
IR Input /Output | 3.5mm Phone Jack x 2 | |
IR Carrier Frequency/Angle/Distance | 30~60KHz / T:± 10° / R:± 55° / 5M / Bi-directional | |
RS-232 Interface | DB9(F)/3.5mm STEREO PHONE JACK | DB9(M)/3.5mm STEREO PHONE JACK |
RS-232 Data Rate | 115200 bps / Duplex | |
Power Supply | DC 24 / 1.25A | |
Power Consumption | Max: 11.4W,Power Saving Mode: 1.8W | |
Temperature | Operation: 0 to 55℃, Storage: -20 TO 85℃, Humidity: up to 95% | |
Dimensions mm | 86 × 93.5 × 42.8 | 92 × 69.5 × 25 |
Weight g | 300 | 185 |