Description :

Dielectric：Metallized Polypropylene film
Winding：Non-inductive type
Protection：Plastic case and epoxy resin filled
1) BO type：Rectangular Plastic Case
2) BL type：With mounting plates in case
3) BT type：With mounting metal plates on top of case
Lead style：
1) TC：Tinned copper wire
2) PC：PVC insulation wire
3) ST：Soldering terminals
4) FT：Fast-on terminals

Specification :

Rated Capacitance (Cr)：
0.1μ～50μF
Rated Voltage (RV)：
125VAC～ 900VAC (for AC application)
250VDC～1800VDC (for DC application)
Capacitance tolerance (at 1KHZ)：
±5%(J), ±10%(K),+10/-5%(U)
Other tolerance upon request
Operating temperature range：
Min. temperatures：-40℃, -25℃
Max. temperatures：+70℃, +85℃, +105℃
Withstand voltage (at 25±5℃)：
a)Between terminals：1.75×RV for 10Sec.
No flashover or permanent breakdown shall occur, but self-healing are allowed.
b)Between terminals and case：2RV+1KV(2000V Min.) for 2～60Sec.
During this test, no dielectric breakdown or flashover shall occur.
Insulation Resistance (Rins)：
Measured between terminals at 25±5℃,
after 1 minute of electrification at 100VDC
Rins≧1000MΩ.μF (for AC application)
Rins≧10×103MΩ.μF (for DC application)
Dissipation Factor (DF)：
tanδ, measured at 25±5℃, 1KHZ
0.1μF≦Cr≦1μF：0.1%Max.
Cr＞1μF：0.5%Max.
Endurance Test：
Test conditions
Temperature：The maximum permissible capacitor operating temp
Voltage applied：1.25RV continuous
Performance
During this test, no permanent breakdown, interruption or flashover shall occur.
Capacitance change(△C/C)：≦±3%
Damp-heat Test：
Test conditions
Temperature：40±2℃
Relative humidity：90~95%
Test duration：1000±24h
Performance
Capacitance change(△C/C)：≦±0.5%

• 
  Metallized Polypropylene Film Capacitor
• 
  Axial-Type Metallized Polypropylene Film Capacitor