Fine Turning Chuck
- 20151225090332
- Model No:
KM-6
- Product Description:
The Fine turning chuck has move accuracy than normal chuck. It can be Fix the accuracy any time. The Fine turning chuck should use with chuck mounting plate. It only has 6" type of chuck.
Boring Tool Holder
- 20150515132555
- Model No:
TH-04A
- Product Description:
The hardened steel holders mount directly to eight station turret. Boring tools align to center line height of 90º degree slot. Specify 12mm or 3/8" or 1/2" tool slide center height when ordering.
Boring Tool Holder
- 20150515132534
- Model No:
TH-04R, TH-04L
- Product Description:
The boring tool holder is for direct application to the eight station turret. It is used for holding 20mm diameter boring bars, turning tools or split bushings. The body of the boring tool holder is made of hardened steel.
Specify 12mm or 3/8" ...
Drill And Shank Tool Holders
- 20150515132454
- Model No:
TH-05
- Product Description:
The hardened steel holders mount directly to eight station turret. They are used for holding drills directly or with split bushings, or for holding any of the 5/8" round shank turret tooling.
Triple Tool Holder
- 20150515132431
- Model No:
TH-03
- Product Description:
The triple tool holder fits directly to the turret and is used to hold three standard 10mm square tool bits or for spacing two tools. The tool holder body is made of hardened steel.
Double Tool Holder
- 20150515132337
- Model No:
TH-02
- Product Description:
The Double Tool Holder is mounted directly to the CHR-68 turret The double tool holder takes two standard 10mm square tool bits. The tool holder body is made of hardened steel.
Adjustable Tool Holder
- 20150515132321
- Model No:
TH-06
- Product Description:
The adjustable tool holder permits setting of center drills, drills, reamers and other end-working tools to the exact center of workpiece.
The holder is mounted directly to the eight station turret and holds 5/8" diameter tool shanks or bushing...
Manual Toolroom Lathes (Lathe Centers)
- 20150515132254
- Model No:
CTL-618EVS
- Product Description:
1. 280mm (11") swing over bed.
2. 457mm (18") distance between centers.
3. Dual range inch/metric quick change gearbox.
4. Infinitely variable spindle speeds from 0-4000 RPM
5. Full bearing carriage with turcite-b slideway bearing m...
Tooling Holder
- 20150515132238
- Model No:
TH-42, TH-43
- Product Description:
This tool holder center high is 10mm, can choose Right or Left hand tool holder.
High Speed And High Accuracy Toolroom Lathes
- 20150515132222
- Model No:
CTL-618e
- Product Description:
This lathe doesn't use threading gearbox, instead computer-controlled servo motor is directly linked to the leadscrew. Just use your finger to select desired thread pitch on the touchscreen display, the threads come out absolutely precise and you...
Square Shank Tool Holder (right/left Hand)
- 20150515132039
- Model No:
TH-44, TH-45
- Product Description:
This tool holder center high is 10mm, can choose Right or Left hand tool holder.
Extension Tool Holders
- 20150515132006
- Model No:
TH-48, TH-49, TH-50, TH-51
- Product Description:
Extension Tool Holders are used for turning or, with optional holders, for boring knurling or cutoff.
Extension Tool Holders are available in four Sizes 5mm, 75mm;, 100mm and 125mm lengths (measured from centerline of T-bolts to extension end of hol...
CNC Toolroom Lathes (Gang-Type)
- 20150515131946
- Model No:
CT-606CNC
- Product Description:
CNC toolroom lathe features advanced functionalities and designs. Made and serviced by cyclematic machinery Co., Ltd. That is committed to quality excellence.
Multiple Tool Holder
- 20150515131930
- Model No:
T-FMH-06(Front), T-RMH-06(Rear)
- Product Description:
This tool holder has an opening 11mm x 54mm, permitting the use of standard 3/8" square tool bits in any multiple tool capacity. By using the under-cutting,
chamfering and grooving can be done in one operation. When ordering, specify whether t...
Second Operation Lathes (Lathe Centers)
- 20150515131821
- Model No:
CTS-27EVS
- Product Description:
1. Fully enclosed preloaded angular contact ball bearing headstock with splash shield for spindle.
2. Fast lever collet chucking with a single movement.
3. Specially designed bed ways are made of hardened and ground alloy tool steel that resist we...
CNC Toolroom Lathe
- 20150515131800
- Model No:
CT-A70CNC
- Product Description:
* Gange Type tooling-
The tool holder are directly mount ont T-slot of sub plate. Linear tool arvangemet reduce the tool change time and toltal cycle time. Gange tool system with tool turret will improve efficiency.
* Structure-
70 degree slant...
Second Operation And Toolmaker & Lathes
- 20150515131635
- Model No:
CTL-27EVS
- Product Description:
1. High/ low speed quick change level for Convenience.
2. Designed to machine precision small diameter parts.
3. High performance machining capability of shaft, chucking, or collet held work piece.
Chuck
- 20150515131554
- Model No:
3 jaw or 4 jaw
- Product Description:
This Chuck should be use with fixture plate. The chuck size has 3", 4", 5", and 6"
High Performance Finishing Lathes
- 20150515131503
- Model No:
CP-27EVS
- Product Description:
1. Compact.
2. Welded steel pedestal.
3. High accuracy spindle.
4. Hardened and ground.
5. Precision steel bed ways.
6. Fast setup.
7. Easy operation.
8. Fast lever collet chucking.
9. Wide chip pan.
10. Comfortable foot rest.
Soft Jaws
- 20150515131353
- Model No:
T-3SJ
- Product Description:
Which can use to hydraulic chuck, Fine turning chuck and normal chuck. After put on chuck, can be turning or facing the sofe jaws.
Toolroom Lathes (Lathe Centers)
- 20150515131253
- Model No:
CTL-20
- Product Description:
1. Specialized for small parts, precision parts and fine surface finishing machining.
2.Spindle adopts copper conical bearing and oil film lubrication, light heat deformation of bearing, good at finish cutting and smooth cutting.
3.Spindle designed...
Drill Chuck
- 20150515131234
- Model No:
TDC13-MT2, TDC-16-MT2, TDC19-MT2
- Product Description:
This drill chuck has 3 different kind of size. Which is 1.2-13mm, 3.0-19mm size.
Single Tool Holders
- 20150515131033
- Model No:
TH-01
- Product Description:
The Single Tool Holder is mounted directly to the CHR-68 turret. The single tool holder takes one standard 10mm square tool bit. The tool holder body is made of hardened steel.
Spindle Tooling
- 20150515113525
- Model No:
LT-01-110T
- Product Description:
For:CTL-618EVS, CTL-27EVS, CT-1118CNC, CTL-618e.
Spindle Tooling
- 20150515113505
- Model No:
T-317(Taper)
- Product Description:
For: CTL-618EVS, CTS-27EVS, CTL-27EVS, CHR-68EVS, and CP-27EVS, CT-606CNC, CT-1118CNC, CP-27CNC, CTL-618e, CHR-68e.
Spindle Tooling
- 20150515113449
- Model No:
T-FP-3B, T-FP-5B, T-FP-8B
- Product Description:
For:CTL-618EVS, CTS-27EVS, CTL-27EVS, CHR-68EVS, and CP-27EVS, CT-606CNC, CT-1118CNC, CP-27CNC, CTL-618e, CHR-68e.
Spindle Tooling
- 20150515113427
- Model No:
T-CT-01
- Product Description:
For: CTL-618EVS, CTS-27EVS, CTL-27EVS, CHR-68EVS, and CP-27EVS, CT-606CNC, CT-1118CNC, CP-27CNC, CTL-618e, CHR-68e.
Spindle Tooling
- 20150515113406
- Model No:
T-UCS-25
- Product Description:
For: CTL-618EVS, CTS-27EVS, CTL-27EVS, CHR-68EVS, and CP-27EVS, CT-606CNC, CT-1118CNC, CP-27CNC, CTL-618e, CHR-68e.
CNC Toolroom Lathes (Lathe Centers)
- 20150217100613
- Model No:
CT-1118CNC
- Product Description:
1. Guaranteed circular accuracy to 50 millionths of an inch.
2. Fanuc 0imate cnc controller (standard), fagor 8040tc controller (optional).
3. Powerful 3 hp motor (5hp-optional) with yaskawa current vector inverter drive for improved torque respon...
CNC Toolroom Lathe
- 20150217091049
- Model No:
CJ-27CNC
- Product Description:
Optional:
* 5C collet
* Step chuck
* collet stop
* Expending collet
