Molded Rubber Parts
- 20170526162018
- Model No:
N/A
- Product Description:
1. Compression, transfer, and injection molding, extruding, lathe cutting, stamping and other fabricating services.
2. Various materials and hardness for all kinds of application NR, SBR, ACM, EPDM, NBR and so on, depending on customer's requir...
Molded Rubber Parts
- 20170526161959
- Model No:
N/A
- Product Description:
1. Compression, transfer, and injection molding, extruding, lathe cutting, stamping and other fabricating services.
2. Various materials and hardness for all kinds of application NR, SBR, ACM, EPDM, NBR and so on, depending on customer's requir...
Molded Rubber Parts
- 20170526161916
- Model No:
N/A
- Product Description:
1. Compression, transfer, and injection molding, extruding, lathe cutting, stamping and other fabricating services.
2. Various materials and hardness for all kinds of application NR, SBR, ACM, EPDM, NBR and so on, depending on customer's requir...
Molded Rubber Parts
- 20170526161902
- Model No:
N/A
- Product Description:
1. Compression, transfer, and injection molding, extruding, lathe cutting, stamping and other fabricating services.
2. Various materials and hardness for all kinds of application NR, SBR, ACM, EPDM, NBR and so on, depending on customer's requir...
Molded Rubber Parts
- 20170526161841
- Model No:
N/A
- Product Description:
1. Compression, transfer, and injection molding, extruding, lathe cutting, stamping and other fabricating services.
2. Various materials and hardness for all kinds of application NR, SBR, ACM, EPDM, NBR and so on, depending on customer's requir...
Molded Rubber Parts
- 20170526161822
- Model No:
N/A
- Product Description:
1. Compression, transfer, and injection molding, extruding, lathe cutting, stamping and other fabricating services.
2. Various materials and hardness for all kinds of application NR, SBR, ACM, EPDM, NBR and so on, depending on customer's requir...
Molded Rubber Parts
- 20150511151451
- Model No:
06
- Product Description:
Produce by compression, transfer, and injection molding. Best Ring has more than 20 years experience in manufacturing rubber products including o rings, u rings, v rings, seals and other rubber products.
Rubber Products ( O Rings )
- 20150511151407
- Model No:
07
- Product Description:
1. O-ring:
(1) AS568A, metric, JIS B2401.
(2) All type of materials.
(3) Smallest 0.5 mm ID x 0.5 mm C/S.
(4) Largest OD=800mm.
2. Hydraulic seals:
(1) Rubber materials.
(2) Rod seals, piston seals, wipers, cushioning seals, rotary seals.
(...
O Ring Cords
- 20150511151244
- Model No:
05
- Product Description:
1. Durometers from 50-80.
2. Non-standard colors available.
3. It can be supplied in the following standard materials: Nitrile, FKM, silicone, EPDM and Neoprene.
Automotive Rubber Parts
- 20150511151200
- Model No:
08
- Product Description:
1. Products can resistance high-temperature, resistance low-temperature, resistance ozone, resistance chemical solvent,
resistance oil, resistance abrasion, resistance compression.
2. FDA approved, products can: isolation, fireproof, waterproof, s...
Metal Bondings
- 20150511151123
- Model No:
04
- Product Description:
Metal bonded rubber parts: all type rubber bonded to meal, aluminum alloy, stainless steel, brass, etc.
Custom Rubber Parts
- 20150511151042
- Model No:
09
- Product Description:
1. Compression, transfer, and injection molding, extruding, lathe cutting, stamping and other fabricating services.
2. Various materials and hardness for all kinds of application NR, SBR, ACM, EPDM, NBR and so on, depending on customer's require...
O Ring Kits
- 20150511151006
- Model No:
03
- Product Description:
O ring kits:
1. The most inexpensive and economical sealing element.
2. All major compounds are available.
3. All o-rings are made according to international standard.
4. ISO3601, AS568A DIN3771, BS1806.
5. Cords are produced by extrusion.
Rubbers To Metal Bondings
- 20150511150936
- Model No:
10
- Product Description:
All type rubber bonded to meal, aluminum, stainless steel, brass, etc.
O Rings
- 20150511150905
- Model No:
02
- Product Description:
1. Various materials and hardness for customer's option, include FKM, Nitrile, EP, silicone, ACM, flour silicone, alfas, polyurethane, neoprene, etc.
2. All o-rings are made according to international standard: ISO 3601, AS 568A, DIN 3771, JIS B...
Custom Molded Rubber Parts
- 20150511150839
- Model No:
11
- Product Description:
1. Compression, transfer, and injection molding.
2. Various materials and hardness for all kinds of application NR, SBR, ACM, EPDM, NBR and so on, depending on customer's requirement.
Rubber Parts (Oil Seal)
- 20150511150806
- Model No:
01
- Product Description:
Rubber part:
Compression, transfer, and injection molding, extruding, and other fabricating services. Fully automatic machinery equipped for making high volume parts.
O Rings
- 20150511150710
- Model No:
01
- Product Description:
An o ring is a loop of elastomer with a round (o-shaped) cross-section used as a mechanical seal or gasket. They are designed to be seated in a groove and compressed during assembly between two or more parts, creating a seal at the interface.
O Rings
- 20150511150648
- Model No:
568-320
- Product Description:
An o ring is a loop of elastomer with a round (o-shaped) cross-section used as a mechanical seal or gasket. They are designed to be seated in a groove and compressed during assembly between two or more parts, creating a seal at the interface.
O Rings
- 20150511150625
- Model No:
03
- Product Description:
An o ring is a loop of elastomer with a round (o-shaped) cross-section used as a mechanical seal or gasket. They are designed to be seated in a groove and compressed during assembly between two or more parts, creating a seal at the interface.
O Rings
- 20150511150604
- Model No:
568-219
- Product Description:
An o ring is a loop of elastomer with a round (o-shaped) cross-section used as a mechanical seal or gasket. They are designed to be seated in a groove and compressed during assembly between two or more parts, creating a seal at the interface.
O Rings
- 20150511150530
- Model No:
568-326
- Product Description:
An o ring is a loop of elastomer with a round (o-shaped) cross-section used as a mechanical seal or gasket. They are designed to be seated in a groove and compressed during assembly between two or more parts, creating a seal at the interface.
O Rings
- 20150511150458
- Model No:
568-214
- Product Description:
An o ring is a loop of elastomer with a round (o-shaped) cross-section used as a mechanical seal or gasket. They are designed to be seated in a groove and compressed during assembly between two or more parts, creating a seal at the interface.
O Rings
- 20150511150432
- Model No:
568-330
- Product Description:
An o ring is a loop of elastomer with a round (o-shaped) cross-section used as a mechanical seal or gasket. They are designed to be seated in a groove and compressed during assembly between two or more parts, creating a seal at the interface.
O Rings
- 20150511150405
- Model No:
68x3
- Product Description:
An o ring is a loop of elastomer with a round (o-shaped) cross-section used as a mechanical seal or gasket. They are designed to be seated in a groove and compressed during assembly between two or more parts, creating a seal at the interface.
O Rings
- 20150511150341
- Model No:
568-340
- Product Description:
An o ring is a loop of elastomer with a round (o-shaped) cross-section used as a mechanical seal or gasket. They are designed to be seated in a groove and compressed during assembly between two or more parts, creating a seal at the interface.
Molded Rubber Parts
- 20150511150314
- Model No:
10
- Product Description:
1. Compression, transfer, and injection molding, extruding, lathe cutting, stamping and other fabricating services.
2. Various materials and hardness for all kinds of application NR, SBR, ACM, EPDM, NBR and so on, depending on customer's requir...
O Rings
- 20150511150238
- Model No:
568-313
- Product Description:
An o ring is a loop of elastomer with a round (o-shaped) cross-section used as a mechanical seal or gasket. They are designed to be seated in a groove and compressed during assembly between two or more parts, creating a seal at the interface.
Molded Rubber Parts
- 20150511150213
- Model No:
17
- Product Description:
1. Compression, transfer, and injection molding, extruding, lathe cutting, stamping and other fabricating services.
2. Various materials and hardness for all kinds of application NR, SBR, ACM, EPDM, NBR and so on, depending on customer's requir...
Molded Rubber Parts
- 20150511145629
- Model No:
02
- Product Description:
1. Compression, transfer, and injection molding, extruding, lathe cutting, stamping and other fabricating services.
2. Various materials and hardness for all kinds of application NR, SBR, ACM, EPDM, NBR and so on, depending on customer's requir...
Rubber To Metal Bondings
- 20150511145505
- Model No:
06
- Product Description:
We use the latest technology to manufacture rubber to metal bonding in precision and excellence. Stringent quality control begins with material inspection to ensure the stability and reliability of raw materials. With new products, 3D measurement dev...
Rubber To Metal Bondings
- 20150511145403
- Model No:
07
- Product Description:
We use the latest technology to manufacture rubber to metal bonding in precision and excellence. Stringent quality control begins with material inspection to ensure the stability and reliability of raw materials. With new products, 3D measurement dev...
Rubber To Metal Bondings
- 20150511145251
- Model No:
09
- Product Description:
We use the latest technology to manufacture rubber to metal bonding in precision and excellence. Stringent quality control begins with material inspection to ensure the stability and reliability of raw materials. With new products, 3D measurement dev...
Rubber To Metal Bondings
- 20150511145140
- Model No:
10
- Product Description:
We use the latest technology to manufacture rubber to metal bonding in precision and excellence. Stringent quality control begins with material inspection to ensure the stability and reliability of raw materials. With new products, 3D measurement dev...
O Ring Kits
- 20150511144856
- Model No:
01
- Product Description:
1. The most inexpensive and economical sealing element.
2. All major compounds are available.
O Ring Kits
- 20150511144709
- Model No:
02
- Product Description:
1. The most inexpensive and economical sealing element.
2. All major compounds are available.
Molded Rubber Parts
- 20150511143512
- Model No:
16
- Product Description:
1. Compression, transfer, and injection molding, extruding, lathe cutting, stamping and other fabricating services.
2. Various materials and hardness for all kinds of application NR, SBR, ACM, EPDM, NBR and so on, depending on customer's requir...
O Ring Material
- 20150511143243
- Model No:
568-219
- Product Description:
O Ring Material AS-568 standard with Material: SIL70 is your premium selection.
O Ring Design
- 20150511142917
- Model No:
568-346
- Product Description:
O Ring Design is premium fit your needs for o ring purchasing.
Rubber Molded Parts
- 20150511142647
- Model No:
09
- Product Description:
1. Compression, transfer, and injection molding, extruding, lathe cutting, stamping and other fabricating services.
2. Various materials and hardness for all kinds of application NR, SBR, ACM, EPDM, NBR and so on, depending on customer's requir...
Molded Rubber Parts
- 20150511142545
- Model No:
11
- Product Description:
* Compression, transfer, and injection molding, extruding, lathe cutting, stamping and other fabricating services.
* Customer design mold.
O-Ring Kit
- 20150511142455
- Model No:
04
- Product Description:
1. The most inexpensive and economical sealing element
2. All major compounds are available
Rubber To Metal Bonding
- 20150511142326
- Model No:
01
- Product Description:
We specialize in the design and production of rubber to metal bonding products, and its materials has aluminum, stainless steel and brass. We use the latest technology to manufacture rubber to metal bonding in precision and excellence. Stringent qual...
