* The bed, column, saddle and table are manufactured from high quality Meehanite cast iron, stress relieved for high stability.
* All slideways are hardened, precision ground, then coated with Turcite-B for maximum wear resistance.
* The X, Y axes are protected by stainless steel telescopic covers.
* The X, Y axis drive employs high precision lead screws, combined with double nuts, ensuring high accuracy of feed.
* The spindle runs on precise angular contact bearings.
* The spindle is precision manufactured from SCM21 alloy steel, heat treated and precision ground.
* All gears in milling head are hardened and precision ground for quiet running.
* The X-axis feed is driven by a high torque servo motor, providing variable feed speed.
* The powerful spindle motor gives a high chip removal rate.
* Choice of Fanuc or Mitsubishi CNC controller.
* All models can be converted into CNC controlled system.
Model | VH480 | ||
---|---|---|---|
Table | Table size | mm | 1900x420 |
X axis travel | mm | 1300 | |
Y axis travel | mm | 850 | |
Z axis travel | mm | 780 | |
T-Slot(width x trough number x pitch) | mm | 18x5x80 | |
X Feedrate (variable) | mm/min | 30~2800 | |
Y Feedrate (variable) | mm/min | 30~2800 | |
Z Axis feedrate (variable) | mm/min | 30~2800 | |
X Axis Rapid travel | mm/min | 2800 | |
Y Axis Rapid travel | mm/min | 2800 | |
Z Axis rapid travel | mm/min | 2800 | |
Range of cutting reference | Cutting length (parameter) | mm | 1300 |
Cutting width (parameter) | mm | 450 | |
Cutting height (parameter) | mm | 500 | |
Loading weight (parameter) | kgs | 1500 | |
Spindle (Vertical) | Spindle speed R.P.M(60HZ) | RPM | 45~1500 (18 steps) |
Spindle taper | NT50 | ||
Distance of Spindle nose to table surface | mm | 0~583 | |
Distance of spindle center to column | mm | 480 | |
Spindle (Horizontal) | Spindle speed R.P.M(60HZ) | RPM | 45~1500 (18 steps) |
Spindle taper | NT50 | ||
Distance of Spindle center to table surface | -10~770 | ||
Distance of spindle nose to table surface | 260 | ||
Power | Spindle motor | 10HPx4P AC | |
X axis feed motor | 2HP | ||
Y axis feed motor | 2HP | ||
Z axis feed motor | 2HP | ||
Packing Dimension | LxWxH (after packing) | mm | 3050x2280x2560 |
Net weight (before packing) | kgs | 5500KG | |
Gross weight (after packing) | kgs | 6500KG |