1. All models can be converted into CNC controlled system.
2. The bed, column, saddle and table are manufactured from high quality Meehanite cast iron, stress relieved for high stability.
3. All slideways are hardened, precision ground, then coated with Turcite-B for maximum wear resistance.
4. The X, Y axes are protected by stainless steel telescopic covers.
5. The X, Y axis drive employs high precision lead screws, combined with double nuts, ensuring high accuracy of feed.
6. The spindle runs on precise angular contact bearings.
7. The spindle is precision manufactured from SCM21 alloy steel, heat treated and precision ground.
8. All gears in milling head are hardened and precision ground for quiet running.
9. The X-axis feed is driven by a high torque servo motor, providing variable feed speed.
10. The powerful spindle motor gives a high chip removal rate.
11. Choice of Fanuc or Mitsubishi CNC controller.
12. All models can be converted into CNC controlled system.
Model | VH780 | ||
---|---|---|---|
Table | Table size | mm | 2600x700 |
X axis travel | mm | 2000 | |
Y axis travel | mm | 1050 | |
Z axis travel | mm | 1000 | |
T-Slot(width x trough number x pitch) | mm | 20x5x125 | |
X Feedrate (variable) | mm/min | 30~2800 | |
Y Feedrate (variable) | mm/min | 30~2800 | |
Z Axis feedrate (variable) | mm/min | 30~2800 | |
X Axis Rapid travel | mm/min | 2800 | |
Y Axis Rapid travel | mm/min | 2800 | |
Z Axis rapid travel | mm/min | 2800 | |
Range of cutting reference | Cutting length (parameter) | mm | 2000 |
Cutting width (parameter) | mm | 750 | |
Cutting height (parameter) | mm | 750 | |
Loading weight (parameter) | kgs | 3000 | |
Spindle (Vertical) | Spindle speed R.P.M(60HZ) | RPM | 45~1500 (18 steps) |
Spindle taper | NT50 | ||
Distance of Spindle nose to table surface | mm | 0~803 | |
Distance of spindle center to column | mm | 780 | |
Spindle (Horizontal) | Spindle speed R.P.M(60HZ) | RPM | 45~1500 (18 steps) |
Spindle taper | NT50 | ||
Distance of Spindle center to table surface | -10~990 | ||
Distance of spindle nose to table surface | 200 | ||
Power | Spindle motor | 15HPx4P AC | |
X axis feed motor | 3HP | ||
Y axis feed motor | 3HP | ||
Z axis feed motor | 3HP | ||
Packing Dimension | LxWxH (after packing) | mm | 3930x3240x3430 |
Net weight (before packing) | kgs | 15000KG | |
Gross weight (after packing) | kgs | 16000KG |
1. SPINDLE LUBRICATION SYSTEM: The gears and bearings in the milling head are lubricated by an efficient lubrication system to ensure their normal service life. The oil, after fan cooling, is delivered to the gears and bearings.
2. RUGGED SADDLE: Massive, scientifically rib reinforced saddle provides rigid support for the table and heavy workpieces.
3. PRACTICAL TELESCOPIC COVER: The X,Y axes slideways are protected by telescopic cover to prevent scratching on surfaces from chips, and extend the service life of the machine.
4. INTEGRATED AUTO LUBRICATING
5. VERTICAL AND HORIZONTAL MILLING HEAD: A combination of vertical and horizontal spindles in a milling head for efficient machining. When operating with a rotary table, 5 surface machining can be quickly accomplished. The gears inside the milling head are manufactured from SCM-21, carburized and tempered, then precision ground for heavy duty machining and smooth urnning. Automatic forced lubrication to the milling head gears ensures minimum gear wear and long service life.
7. This machine can be fitted withy a rotary table for easy and time saving 5-side machining.