Shun Chuan Precision Machinery Co., Ltd.
Tel:886-37-741591 Fax:886-37-741593
Address:No. 5, Lin 1, Shan Kan Li, Yuan Li Town, Miaoli 35873, Taiwan
Detail Information
Description :
•All models with one piece solid stand.
•All models with universal feed gearbox & reversable apron.
•All models meet CE. (on request)
•All models with 52.5mm (2.066") spindle bore, ASA D1-6.
•All castings are properly stabilized and stress relieved.
•Bed ways are hardened & ground to min. HS-70.
•Turcite B coating between the bed and carriage.
•Extremely low noise level.
•Foot brake pedal provided.
•Built-in coolant pump & fitting provided.
•Wider bed way which give absorbs vibration.
Specification :
STANDARD ACCESSORIES:
- Backplate for 9" chuck
- Dead center MT.4
- Dead center MT.4 with carbide tip
- Spindle center sleeve MT.6
- Level pads......6 pcs
- Tool set & Box
- Operation manual & parts list
OPTIONAL ACCESSORIES:
- 3-Jaws scroll 9" chuck
- 4-Jaws independent 10" chuck
- 5C collet closer attachment
- 5C collets (metric or inch)
- Driving plate with dog
- Chuck safety guard
- Hydraulic copying attachment
- Tool post grinder attachment
- Taper turning attachment
- Electrical system for CE
- Protect cover on leadscrew for CE
- Steady rest w/ball bearing
- Follow rest w/bronze tip
- Faceplate 12"
- Drill chuck & arbor
- Rotating center MT.4
- Halogen lamp
- Quick change tool post
- Carriage micro stop set
- Digital read out system
- Full length splash guard
SPECIFICATIONS:
| MODEL | TML-1640 | TML-1660 | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity | Height of centers | 205 mm (8.07") | ||||||||||||||||||
| Swing over bed | Ø410 mm (16.14") | |||||||||||||||||||
| Swing in gap | Ø583 mm (22.95") | |||||||||||||||||||
| Swing over cross slide | Ø262 mm (10.3") | |||||||||||||||||||
| Distance between centers | 1000 mm (40") | 1500 mm (60") | ||||||||||||||||||
| Width of bed | 260 mm (10.236") | |||||||||||||||||||
| Gap width in front of faceplate | 135 mm (5.31") | 225 mm (8.85") | ||||||||||||||||||
| Headstock and Main Spindle | Spindle nose, internal taper | D1-6, MT. No.6 | ||||||||||||||||||
| Spindle center sleeve | MT. No.6 x MT. No.4 | |||||||||||||||||||
| Spindle bore | Ø52.5 mm (2.066") | |||||||||||||||||||
| 12 steps /36~1800 R.P.M.
| |||||||||||||||||||
| Carriage | Length on bed / Width of carriage | 513 mm (20.19") / 412 mm (16.22") | ||||||||||||||||||
| Cross slide travel | 220 mm (8.6") | |||||||||||||||||||
| Top slide travel | 130 mm (5.1") | |||||||||||||||||||
| Threads and Feeds | Whitworth threads: Kinds / Range | 45 Kinds / 2~72 T.P.I. | ||||||||||||||||||
| Metric threads: Kinds / Range | 39 Kinds / 0.2~14 mm | |||||||||||||||||||
| D.P. threads: Kinds / Range | 21 Kinds / 8~44 D.P. | |||||||||||||||||||
| M.P. threads: Kinds / Range | 18 Kinds / 0.3~3.5 M.P. | |||||||||||||||||||
| Longitudinal feeds | 0.05~1.7 mm (0.002"~0.067") | |||||||||||||||||||
| Cross feeds | 0.025~0.85 mm (0.001"~0.034") | |||||||||||||||||||
| Tailstock | Quill diameter | Ø52 mm (2.47") | ||||||||||||||||||
| Quill travel | 152 mm (6") | |||||||||||||||||||
| Taper of center | MT.No.4 | |||||||||||||||||||
| Motor | Main spindle | 5HP | ||||||||||||||||||
| Coolant pump | 1/8HP | |||||||||||||||||||
| Measurement | Weight (Net /Gross) Approx. | 1500 / 1650 kgs | 1600 / 1750 kgs | |||||||||||||||||
| Packing sizes | Length | 2270 mm (89.4") | 2785 mm (109.7") | |||||||||||||||||
| Width x Height | Width 1120 mm (44.1") x Height 1900 mm (74.8") | |||||||||||||||||||
Specifications subject to change without notice.
Shun Chuan Precision Machinery Co., Ltd.
- Taiwan
- No. 5, Lin 1, Shan Kan Li, Yuan Li Town, Miaoli 35873, Taiwan
- 886-37-741591
- 886-37-741593