1. XM-23L4 is 4 ports 10/100/1000 Mbps UTP Ethernet test module. High test quality & reliable test result - The test modules are specifically built for production test at wirespeed to ensure the quality and reliability of the test.
2. Hardware counters: TX packet/bytes, RX packet/byte, unicast, multicast, broadcast, VLAN packet, pause packet, CRC error, DI checksum error, serial number error, alignment error, oversize packet, undersize packet, dribble bit, IP checksum error, trigger 1, trigger 2, trigger 3, trigger 4, trigger 5, trigger 6, trigger 7, trigger 8, collision TxArpReq, TxArpReply, RxArpReq, RxArpReply, TxICMPReq, TxICMPReply, RxICMPReq, RxICMPReply.
3. Error packet generation: 10/100 Mbps: no CRC, CRC error, alignment error, IP check sum.
1. Interface: UTP port for RJ-45. 2. Port Density: 4. 3. Speed and Mode: 10/100 Mbps: half / full duplex; 1000Mbps: full duplex. 4. CPU: 32 bits communication processor. 5. Preamble: 4~16 bytes. 6. Frame length(w/o VLAN tag): 48 ~ 16379 bytes (without CRC): fixed / increase / decrease / random. 7. Data field: all zeros, all ones, 55, AA, 55AA, 5A5A, 00FF, 0000FFFF, 8-0's 8-F's, fixed / increase / decrease / random in byte or in word; user defined. 8. Inter frame gap: fixed / random (10 Mbps: 8800 ns~1 sec;100 Mbps: 880 ns~1 sec; 1000 Mbps: 88 ns~1 sec). 9. Data integrity / sequence: yes. 10. Source/destination MAC address: 32 bits variation fixed / increase / decrease / random. 11. Source/destination IP address: 16 bits variation fixed / increase / decrease / random. 12. VLAN(VLAN ID/COS field): (VLAN ID / COS field): fixed / increase / decrease / random. 13. Flow control: 802.3x flow control. 14. QoS testing: Up to 8 priority queues. 15. Line performance: wirespeed. 16. Auto MDI/MDIX: yes. 17. Link mode: enable / disable.
1. XM-23L4: 4 Ports 10/100/1000 Mbps UTP Ethernet test module.
2. Flexible traffic generation and analysis.
(1) Real-time, wirespeed generation and analysis of layer 2 and 3 traffic.
(2) Single / burst / multi-burst / continuous packet generation.
(3) Frame length (w/o VLAN tag): 48 to 16379 bytes.
(4) Varies multiple address fields to create millions of unique flow.
(5) Random IFG generation support.
(6) Support 802.3 x flow control.
(7) Independent operation in each module.
3. Extensive statistics:
(1) Real-time 64 bits counters that provide detailed statistics about every aspect of the packets being transmitted / received.
(2) External file logging for statistics and alerts.
4. X-Trailer for frame data integrity verification.
5. Generation and response to ARP and Ping for layer 3 testing.