Hydraulic Jack
- 20150511130210
- Model No:
JTC-AJ120
- Product Description:
• Low profile design for most of industrial applications.
• Forging base as the strongest construction to catch the needs in industry market.
• Housing welding onto the forged base makes to be free of leakage problem as well.
• Telescopic design o...
SERVICE JACK
- 20150511130122
- Model No:
JTC-SJ2500
- Product Description:
˙Ideally suited for all automotive; agriculture and light truck repair facilities.
˙Pump is operated by both activating foot pedal to provide speed to contact the load; and activating “T” handle to lift it.
˙Hydraulic power unit with dust seals t...
TABLE-TOP HYDRAULIC PRESS
- 20150511120249
- Model No:
JTC-BP1101
- Product Description:
• Rugged bolt-together construction is designed to fabricate conveniently and efficiently by yourself.
• 10 ton single-acting hydraulic ram with a 10" stroke.
• Sliding ram mount centers over work piece and locks in any positions.
• Manually ...
Hydraulic Press M/C
- 20150511120148
- Model No:
JTC-SP350A
- Product Description:
• Using for wide range of mechanical parts; such as bends deforms; combined for reformation or shaft bearing; gear; press in or extruded
• It designed with double speed of high and low pressure.
Engine Stabilizer Bar
- 20150511115903
- Model No:
JTC-ES417
- Product Description:
• Special new design for 4 fixing point to be a bridge to support the engine.
• Especially using on the car that without inner fender.
• Adjustable in height; position; width; and angle to bridge various vehicle and securely hold engine in place.
Engine Stand
- 20150511115824
- Model No:
JTC-ES909
- Product Description:
• A heavy duty repair stand fro mounting a great variety of engines transmissions; and rear axles of trucks; tractors and construction equipment.
• 4 universal mounting arms in each mounting head allow you to mount a wide variety of components witho...
Automotive Telescopic Transmission Jack
- 20150511115700
- Model No:
JTC-TJ1000
- Product Description:
•Fully adjustable universal saddle with adjustable corner brackets and safety chain.
•Bracket and chain slings are adjustable to accommodate transmissions; clutches and differentials of varying sizes.
•Wide base with four 3-1/2" dia. Swivel ca...
Folding Wrench Set
- 20150511115530
- Model No:
JTC-3503
- Product Description:
• Convenient folding type for easy & high torque application.
• Special design with hole in the head to fit the special screws.
• Made form chrome vanadium steel & heat treated.
Oil Filter Wrench
- 20150511115427
- Model No:
JTC-1945
- Product Description:
Professional oil filter wrench unique "Swivel-Handle" design allows adjustable band to rotate 180 degrees; to reach tight areas. Full range of sizes of fit sub-compact to truck filters. Parts are heat-treated for strength and durability and...
Valve Pliers
- 20150511115323
- Model No:
JTC-1430
- Product Description:
• Not suitable for use on engines with deep seated valves.
• Allow valve springs and valve stem oil seals to be replaced with the cylinder head.
• Feature a reversible jaw/adaptor and automatic cam-action locking to a re-determined setting.
Sub-Frame Bush Installer/ Remover
- 20150511115224
- Model No:
JTC-4138
- Product Description:
* For replacement of the front and rear metallic rear sub-frame mounting bush.
* Replacement of the mounting bushes without removing the complrte rear axle assembly.
DCA/ACA CLAMP METER
- 20150511115201
- Model No:
JTC-1229
- Product Description:
• Use two hell-effect sensors
• For use with any multimeter with 200mv or/and 2v ranges for direct readout.
Input impedance of at least 1mΩ.
• An LED lights up when the clamp is under power
• Zero adjuslment knob to compensate the hysteresis ef...
Micro Computer Digital Flow Meter
- 20150511115107
- Model No:
JTC-4635
- Product Description:
• Waterproof by o-ring sealed.
• Powered by 1"AA" battery.
Universal Pulley Remover
- 20150511115022
- Model No:
JTC-4142
- Product Description:
* Special designed to remove most of belt pulleys.
* With setting screws M6, M8 3pcs of each.
Coil Spring Compressor
- 20150511114901
- Model No:
JTC-F270
- Product Description:
• Drop forged CR-V steel jaws & leaded screws (270mm) both heat treated ensure you obtain professional job performance.
• The tool is designed for use in limited space under wheel arch.
Exhaust Pipe Separator
- 20150511114123
- Model No:
JTC-4057
- Product Description:
Designed especially for providing pull out the exhaust pipe easily.
Tyre Balancer
- 20150511114021
- Model No:
MF MT2820
- Product Description:
MT 2820 can be defined as the most successful compromise of its segment in terms of technology used and reduced overall dimensions. It inherits; in fact; the main programs of its elder sisters (Alu; Easy-Alu; hidden weight; optimisation and multi-ope...
MOTOR TIRE CHANGER
- 20150511113907
- Model No:
WIN-312
- Product Description:
* Bead Breaker Cylinder Power: 2700 kg
* Working Pressure: 8.0 kg
* 1-Phase Electric Motor: 110/220V 550/60Hz 1Hp
Pneumatic Cv Boot Expander
- 20150511113748
- Model No:
JTC-4860
- Product Description:
Innovative tool saves time, money and frustration.
Installs flexible steering and CV boots without removing axle from the vehicle or the CV joint from the axle. No effort and no mess!
Non-Slip Heat Shrink Tube
- 20150511113646
- Model No:
JTC-5918
- Product Description:
Using on handle to make friction and anti-slip.
Color：black, blue, green, yellow, red , each one pc
Tire Pressure Gauge
- 20150511113554
- Model No:
JTC-4058
- Product Description:
‧3 function(check, release, inflator) all together on the press handle.
‧Lightweight design for easier operation.
Combination Electronic Stethoscope Kit
- 20150511113520
- Model No:
JTC-1449
- Product Description:
• To locate & indentify noise and enable road test diagnosis.
• Super sensitive microphone pick up.
• Defect & isolate noisy components.
