This system is the detection management of personnel enters EPA (ESD protected area). The system combinated with identification, electrostatic testing base on classified authority, ESD test records, report management and electric locks or access gate.
PE168-STG-2
ESD tester supports to check personnel grounding of either wrist straps or footwear. The standard resistance and near failure resistance can be set from the color screen login. You also can connect to ESD controller and then set by the ESD management software.
PUA-310V1 series
RFID reader applicable with EM (125KHz ASK), H.C. (125KHz FSK), Mifare cards etc.
PK-UHF201 is one of high-performance UHF frequency reader, combining proprietary signal processing algorithms and efficient, with a high recognition rate processing performance and fast read and write, can be widely used in logistics, parking systems, access control systems, security systems and production process control, and other radio frequency identification (RFID) systems.
Features
•Protocol comply with UHF EPC Gen2(ISO18000-6C), ISO 18000-6B standard.
•Working frequency 902~928MHz(PK-UHF201) / 865~868MHz(PK-UHF201-1)
•Support adjustable frequency range (FHSS) or fixed specific working frequency.
•Power output 0-30dBm (adjustable)
•Built-in 8dBi/12dBi polarized antenna as choice;Reading range 3~5M / 10M.
•Support operation Modes as Answer, Active, Trigger mode.
•Low power design, Input Power: DC +9V.
•Support RS-232, RS-485, Wiegand 26/34 Interface.
Features
•Remote release control ranges up to 10 meters.
(For reference only, sensing distance depends on on-site environment)
•With learning mode button for memory up to 40 pieces transmitter ID’s.
•With LED for indicating power & bolt status.
•Compact structure without additional installation of transmitter receiver and wiring.
•Optional bracket (PG-B64 & PG-DASTC-2) for frameless glass door.
•Electric deadbolt design suitable for double swing door with 180° opening angle.
•With DIP switch for setting time delay for opening & relock door.
•Low working current, no over heating problem.
•Fail safe type released as power off.
Specifications
•Lock size (mm):204(L) x 33(W) x 45(D)
•Approx. weight:687g ±1%
•Nominal voltage:DC11~16V
•Standby current:90~100mA
•Working current:820~870mA
•Temp. range:-20°C ~ 70°C
•Power consumption:1.1W(standby) / 13.9W(work)
Application
As auxiliary lock for emergency door, swing glass sheet door, frameless glass door, wooden door.
*所載規格,本公司有修改權利,如與實品不符,以實品為準
Features
•The PGS-501 is a ANSI size electric door strike.
•Used with Mortice lock and Tubular/Cylindrical latch.
•Suitable for 15mm latches.
•Installed on wooden frames and doors.
•Electric door strike operation:
Power to lock (fail-safe) / Power to open (fail-secure).
•Pair with mortise type dead bolt mechanical lock MK-738
•With patent.
Specifications
•Net weight: 165g±5%
•Voltage / Current: 12VDC @230mA ±10%
•Endurance: 1,000,000 cycles
We reserve the right to change the specification without prior notice or obligation!
Features
•Remote release control ranges up to 10 meters.
•With learning mode button for memory up to 40 pieces transmitter ID’s.
•With LED for indicating power & bolt status.
•Compact structure without additional remote device wiring.
•Electric deadbolt design suitable for double swing door with 180° opening angle.
•With DIP switch for setting time delay for opening & relock door.
•Low working current, no over heating problem.
•Fail safe type released as power off.
Specifications
•Lock size (mm):204(L) x 33(W) x 45(D)
•Approx. weight:687g ±1%
•Nominal voltage:DC11~16V
•Standby current:90~100mA
•Working current:800~850mA
•Temp. range:-20°C ~ 70°C
•Power consumption:1.6W(standby) / 13.6W(work)
Application
As auxiliary lock for emergency door, swing glass sheet door, frameless glass door, wooden door.
We reserve the right to change the specification without notice or obligation!
Product Description
PPT-10 is a mini magnetic stripe card data collection terminal. It is compact and small size for carrying
& suitable for various applications. It can be connected to PC for USB changing & data collecting. Standard
AAA batteries for easy replacement.
Features
1. Built-in RTC (Real-Time Clock) events recording.
2. Equipped with USB port for PC on-line data collection.
3. Support three ways of power supplying:
a. Standard AAA batteries for easy replacement.
b. NiMH rechargeable battery.
c. Powered by USB interface.
4. With automatic power-saving function.
5. LCD display: power source / time / date..
6. User password protection.
7. Low-power indication.
8. Bi-color LED indicator.
Specification
Dimensions(LxWxH)mm
: 66 x 46 x 23
Net weight
: 55g ± 5% (With battery)
LCD
: FSTN 128 x 64 dots
Card type
: Magnetic stripe cards / Credit card
Memory size
: 8M bits
Record capacity
: 4334 records
Power supply
: Standard AAA battery(DC 1.5V) 1 pc / NiMH rechargeable battery 1 pc / USB
Interface
: USB (UART / USB Cable)
Magnetic head life
: 500,000 cycles
Baud rate
: 115,200 bps , 8, N, 1
Operating humidity
: 10%~90%
Operating temperature
: 0℃ ~ 70℃
Applications
Membership or student ID card application, Conference or trade shows attendance, Customer information recording...etc.
Product Description
PR-6750V is a on-line remote access controller with built-in RF receiver. It can be used with electric lock as access control system or with relay box and Key transmitter (Four keys) as car parking system. Optional transmitter (PTM series) with embedded RFID chip can be applied to both parking and access control system. The transmitter capacity: 1,000~32,000pcs
Features
•With hopping code anti-copied remote access controller,transmitter capacity :1,000~32,000pcs.( Depending on the model)
•With up .stop .down and power outage relay, combination relay box with key transmitter (Four keys) as car parking system.
•If the transmitter is copied, hopping code will be no response if you press it.
•You can add/delete the transmitter authorization upon your request by manual control or on-line with PC, and recording OUT/IN time.
Specification
Dimensions(L x W x H)mm
137 x 85 x 29
Net weight
340g ± 5%
Power supply
DC 12V±10%, 80mA(Standby) / 100mA(Working)
Frequency of operation 433.9MHz
Operating temperature
0℃ ~ 70℃
Operating humidity
10%~90%
Product Description
The Door loop is made of metal to protect the electrical installation of the device and electric lock to the wire between the door and the door frame. It is not only beautiful but will also make the wire is not easy destroyed.
Specification
Dimensions:Loop: 350mm(to extend 500mm)
Tube diameter: inner diameter 9mm
outside diameter 12.7mm
Caps: 48(L) x 40(W) x 23(H)mm
*Net weight:240g±5%
*Material:
Loop: stainless steel
Caps: zinc alloy
*Certificate:CE
We reserve the right to change the specification without notice or obligation!
Features
•Read 125 KHz proximity card with EM chip internally for standard model.
•The system parameters are stored in non-volatile memory for 10 years data
retention as power off without any external power supply.
•1000 card holders with 8 digits I.D. number by learning reads.
•The door released time, door monitoring time could be freely programmed for 1, 5
, 10 seconds or normal open/normal close.
•With exit push button for exit or remote exit control.
•Low power CMOS CPU with watch-dog function to assure best performance.
•ABS case for easy installation.
Specification
*Dimensions:118(L) x 75(W) x 17(H)mm
*Net weight:98g ± 5%
*Power supply:DC 12V±10%, 40mA(Standby) / 70mA(Work)
*Operating temperature:0℃ ~ 70℃
*Operating humidity:10%~90%
*Card standard:EM 125KHz
*Waterproof:Yes
We reserve the right to change the specification without notice or obligation!
Product Description
Installation of this product can prevent the access controller failure or other unexpected accidents result in electric lock can not open the door with a key forced to switch N.O. or N.C. contacts to open the door, the product is recommended to install in the secret place to prevent the destruction of. Parallel or series in UPS (uninterruptible power system) and electric lock (Fail-safe / Fail-secured).
Specification
*Dimensions : 5(plate)/34(total depth) x 75(W) x 120(L)mm
*Net Weight : 72g ± 5%
*Hole distance: 84mm
*Material: Face plate: stainless steel (Thickness: 1mm)
Key switch: zinc alloy
*Maximum limit power: 125VAC / 4A, 250VAC / 2A
*Contact resistance : 10Milli-Ohms Max.
*Insulation resistance: 200 Meg-Ohms Min.(500VDC)
*Dielectric strength : 1000 VAC - 1 Minute
*Operating temperature: -20℃ ~ 55℃
*Storage Temperature: <80%RH
*Life: 10,000 cycles
We reserve the right to change the specification without notice or obligation!