Xtramus Technologies
Taiwan Manufacturers, Exporters.
Detail Information
Description :
XM-RM731 is a 2 Combo Gigabit SFP & 10/100/1000 Mbps UTP rapid-Matrix Ethernet test module.
1. Saving valuable time and expenses while testing for network product designs and quality control in mass-production scale, XM-RM series modules provide a flexible, reliable, and high-precision solution
2. Specifically designed for NuStreams chassis (such as NuStreams-2000i and Nustreams-600i), XM-RM series modules supports hot swap, multi-user operation, and Rapid- Matrix, a technology that can generate multi-stream traffic simultaneously with different kinds of frames/packets with almost any required protocol headers, tags and payload for each port.
3. NuStreams-2000i and NuStreams-600i chassis with XM-RM Series test module cards can perform synchronized tests to ensure the test precision. Also, the time consumed for all DUTs' multi-task testing will be shortened dramatically.
4. Along with the advanced technology mentioned above, Xtramus also provides several software applications, such as NuWIN-RM, APMPT-4, and other ongoing softwares complied with RFC-2544, RFC-2889 and etc. XM-RM series can test the network equipments in conformance, performance and stress tests.
Specification :
1. Interface: Gigabit Ethernet (10/100/1000BASE-T): 1 Combo Gigabit SFP & 10/100/1000 Mbps UTP Rapid-Matrix Ethernet Test port for connection to NuStreams Chassis 2. LED Indicator: SYS, Link/Tx (1, 2), Rx/Err (1, 2), Capture (1, 2), X-TAG (1, 2) 3. Speed and Mode: (1) Auto Negotiation / Forced Mode. (2) 10/100Mbps Half / Full Duplex. (3) 1000Mbps Full Duplex. 4. Frame Length: Tx Packet Length: 48 ~ 2Kbytes. 5. Applications (1) Test module for Gigabit Ethernet device. (2) Test module for quality control of network device in mass production line. (3) Test module for new design network product in R&D laboratory that need report of precise statistics and result. (4) Apply to Telecommunication room, R&D laboratory, Data center, etc. 6. Capture criteria: SDFR (self-discover filtering rules) technique is able to capture packets by different criteria in either a unique value or a range of values by user-friendly UI. (1) MAC layer event. (2) Network layer event. (3) SDFR Pattern (set). (4) 2nd level CRC.
Features :
1. Supports 10/100/1000 Mbps Ethernet test equipment.
2. Wirespeed hardware based traffic generation and analysis.
3. High test performance with low-cost testing ports.
4. Stream based wire speed layer2~3 traffic load generation.
5. RFC 2544/2889 test suite.
6. Wirespeed traffic capture with programmable filter and trigger criteria.
7. High-precision performance measurement of throughput, latency, loss, sequence and mis-ordering error.
8. Remote management of testpoints.
9. Validation with negative and abnormal test conditions per packet byte.
10. Real-time statistics for each port, including transmitted/received frame for VLAN, IPv4, IPv4 fragment, IPv4 extension , ICMP, ARP, total bytes/packets, CRC, IPCS error and over-and-under size frames.
Xtramus Technologies
- Taiwan