Shun Chuan Precision Machinery Co., Ltd.

Tel:886-37-741591       Fax:886-37-741593
Address:No. 5, Lin 1, Shan Kan Li, Yuan Li Town, Miaoli 35873, Taiwan

Inquire Now

Products

High Speed Precision Lathes

High-Speed-Precision-Lathes-3

Inquire Add to Basket
  • Model No: SR-2160
  • Factory Location: Taiwan
  • Sample Request: No
  • Target Markets: Worldwide

Detail Information

Description :

•All models with one piece solid stand.
•All models with universal feed gearbox & reversable apron.
•All models meet CE. (on request)
•All models with 80mm (3.149") spindle bore, ASA D1-8.
•All models cross slide is hardened and ground to prolong operation life.
•All castings are properly stabilized and stress relieved.
•Bed ways are hardened & ground to min. HS-70.
•Turcite B coating between the bed and carriage.
•Extremely low noise level.
•Foot brake pedal provided.
•Built-in coolant pump & fitting provided.
•Wider bed way which give absorbs vibration.

Specification :

STANDARD ACCESSORIES:

  1. Backplate for 10" chuck
  2. Dead center MT.5
  3. Dead center MT.4 with carbide tip
  4. Spindle center sleeve........Ø85mm Taper 1/19.18
  5. Level pads......6 pcs
  6. Tool set & Box
  7. Operation manual & parts list

OPTIONAL ACCESSORIES:

  1. 3-Jaws scroll 10" chuck
  2. 4-Jaws independent 12" chuck
  3. 5C collet closer attachment
  4. 5C collets (metric or inch)
  5. Faceplate 14"
  6. Chuck safety guard
  7. Hydraulic copying attachment
  8. Tool post grinder attachment
  9. Taper turning attachment
  10. Electrical system for CE
  11. Protect cover on leadscrew for CE
  12. Steady rest w/ball bearing
  13. Follow rest w/bronze tip
  14. Drill chuck & arbor
  15. Rotating center MT.4
  16. Halogen lamp
  17. Quick change tool post
  18. Carriage micro stop set
  19. Digital read out system
  20. Full length splash guard

SPECIFICATIONS:

MODELSR-1840SR-1860SR-2140SR-2160
CapacityHeight of centers231 mm (9.09")271 mm (10.67")
Swing over bedØ462 mm (18.19")Ø542 mm (21.34")
Swing in gapØ650 mm (25.6")Ø730 mm (28.74")
Swing over cross slideØ307 mm (12.1")Ø387 mm (15.23")
Distance between centers850 mm (33.46")1350 mm (53.15")850 mm (33.46")1350 mm (53.15")
Width of bed305 mm (12")
Gap width in front of faceplate165 mm (6.5")
Headstock and
Main Spindle		Spindle nose, internal taperD1-8, Ø85 mm Taper 1/19.18
Spindle center sleeveØ85 mm Taper 1/19.18 x MT. No.5
Spindle boreØ80 mm (3.149")
Spindle speed:Gear steps
/
Range
12 steps / 30~1500 R.P.M.
Ls30456090
Ms110150210320
Hs53075010501500
CarriageLength on bed / Width of carriage440 mm (17.32") / 477 mm (18.77")
Cross slide travel272 mm (10.7")
Top slide travel160 mm (6.3")
Threads and FeedsWhitworth threads: Kinds / Range45 Kinds / 2~72 T.P.I.
Metric threads: Kinds / Range39 Kinds / 0.2~14 mm
D.P. threads: Kinds / Range21 Kinds / 8~44 D.P.
M.P. threads: Kinds / Range18 Kinds / 0.3~3.5 M.P.
Longitudinal feeds0.04~1.0 mm (0.0015"~0.04")
Cross feeds0.02~0.5 mm (0.00075"~0.02")
TailstockQuill diameterØ68 mm (2.677")
Quill travel153 mm (6")
Taper of centerMT.No.4
MotorMain spindle7.5HP10HP
Coolant pump1/8HP
MeasurementWeight (Net /Gross) Approx.1700 / 2000 kgs1850 / 2150 kgs1750 / 2050 kgs1900 / 2200 kgs
Packing sizesLength2400 mm (94.5")2900 mm (114.2")2400 mm (94.5")2900 mm (114.2")
Width x HeightWidth 1155 mm (45.5") x Height 1900 mm (74.8")

Specifications subject to change without notice.

Related Prodcuts

Shun Chuan Precision Machinery Co., Ltd.

  • Taiwan
  • No. 5, Lin 1, Shan Kan Li, Yuan Li Town, Miaoli 35873, Taiwan
  • 886-37-741591
  • 886-37-741593
Inquire Now